Tuesday, January 1, 2013

Flashing Guide for Samsung Galaxy S 3

How to; Flash or Rollback Firmware on the Galaxy S III

Pre-Requisites;

  1. Install Samsung Kies software (The drivers are needed for this process). HERE
  2. Your Phone must be detected by Samsung Kies.
  3. 7zip extraction tool HERE
  4. Backup your contents
  5. Factory Reset the Phone including Formatting the internal Storage. (remove Ext SDcard, just to be safe)
----------------------------------------------------------------------------------------------------------------------------------
Go to www.sammobile.com and create a Free User account
1-Login_sammobile.png
Now Click on (3) Firmwares and Files Tab.
2-click Firmware tab.png
Scroll down the Firmwares and Files Page until you see the Selector below;
Choose;
Type          = Smartphone
OS             = Android
Model       = GT-I9300 - Galaxxy S III
Country   = United Kingdom (Vodafone) - VOD
or United Kingdom - BTU ( for unbranded retail version)
3-selct phone.png
Select the Firmware you require, either the Latest (top of the list) or an older version if you are Rolling Back.
The Firmware can take a long time to download, so time for a coffee or three! :smileywink:

You can also Download Odin3 Flashing Tool from this page. You will need this to Flash the Firmware.
6-download firmware & Odin.png
The Firmware link will take you to a page like this...
4-down firmware.png
The Flashing Tool link will take you to a page like this...
5-down Odin.png
I will assume you have installed 7zip;
Right click on the Flashing Tool File,
Choose 7zip
choose Extract Here
7-extract odin.png
Right Click on the Firmware and Choose
Extract Here.

I would copy both the Flashing Tool Folder and the Firmware to the Desktop to make it easier to locate.

---------------------------------------------------------------------------------------------------------------------------------

From the Desktop open the Flashing Tool Folder and locate...
Odin3 v3.04.exe
Double left click on this file to RUN the software.
run Odin3.png
DO NOT change any settings on this Software!

Click on the PDA button ONLY!
do that now...
and browse to the Desktop and select the Firmware file you extracted earlier.

flash with odin.png
Now we need to put your Phone into Download/Odin mode.
Turn your Phone off.
Now follow the instructions in the picture below;

Download Mode.png
You will see a screen like the one below;
Press Volume UP to enter Odin mode.

P9181249a.png

This is Odin Mode;

P9181251a.png

Now connect your Phone to the PC with the Micro USB cable supplied with your Phone.
Wait for the Drivers to install...
The ID:Com window on the Odin3 software will highlight in Blue.

Now click on the START button.

Sometimes Odin can take a while to start flashing... WAIT!   it will start!
DO NOT disconnect the Phone until it restarts...!

Quickly SKIP through the setup screens and FACTORY RESET AGAIN!

Now setup your phone following the onscreen prompts.

That's it... 


Rolling Back to The Base ICS ROMS:

VOD I9300BUALE6

BTU I9300XXALE8

Follow the flashing Guide as above;

When the phone restarts it may hang at the SAMSUNG logo.

If it does, pull the battery and wait 5 seconds. Then replace the Battery and enter Recovery Mode...
Volume Up + Home + Power; press and hold until the Galaxy S logo appears and release.

Select Wipe Cache Partition. (use vol up and down to navigate, press power to select)
Then...
Select Factory Reset from the Menu. (use vol up and down to navigate, press power to select)

The phone will restart properly.
Wink.gif

1 comment:

  1. Please mention that EFS has to be backed up, otherwise you will land up with an upgrade phone which will not be registered on any network. :)

    ReplyDelete